 |
| Tools |
| K and S Metal Working Tools |
| Navigation: Home > Tools > K and S Metal Working Tools |
|
|
|
|
Tube Cutter, supplied by K and S to complement their extensive range of tubing this handy device makes short work and a very neat job of cutting tube. Capacity 1/16" (1.5mm) to 5/8" (16 mm) MKS296 |
 |
|
Tubing Bending Kit, consisting of 5 sizes of spring that are threaded over tubes whilst they are bent, this kit makes neat work of bending small tube. Size range 1/16" to 3/16" o/d. MKS321 |
 |
|
Mini Wire Bender, designed to bend wire through angles up to 180 degrees this useful device will produce greater accuracy than the vice, big hammer, and welly alternative. Needs to be mounted in a firm vice. MKS323 |
 |
|
Mighty Wire Bender, this bender is capable of accepting piano wire up to 3/16" diameter. It will bend through 180 degrees but again needs a very solid mounting. MKS322 |
 |
|
Coil Winder, This heavy duty winder will coil piano wire up to 3/16". It can be used to make sprung undercarriage legs etc. Make sure that you have a very substantial vice and work bench to mount this in. MKS324 |
 |